WIRELESS DOOR LOCK CONTROL SYSTEM > SYSTEM DESCRIPTION |
| WIRELESS DOOR CONTROL SYSTEM DESCRIPTION |
This system locks and unlocks the vehicle's doors remotely. The wireless control system has the following features:
The wireless door lock control system has the following functions:
| Function | Outline |
| All doors lock operation | Pressing LOCK switch locks all doors. |
| All doors unlock operation (2-step unlock operation) | Pressing UNLOCK switch once unlocks driver side door. Pressing UNLOCK switch again within 3 seconds unlocks remaining doors. |
| Answer-back operation |
|
| Panic alarm operation | Holding down PANIC switch sets off theft deterrent alarm, which consists of sounding horn, flashing headlights, taillights and hazard warning lights and turning room light on. |
| Automatic lock function | If no doors are opened within 30 seconds of being unlocked by wireless door lock remote control, all doors lock again automatically. |
| Repeat function | If a door is not locked in response to locking operation of transmitter, multiplex network body ECU outputs lock signal after 1 second. |
| Illumination entry function | With all doors locked, pressing UNLOCK switch causes room light to illuminate simultaneously with unlocking operation. |
| Security function | Sends signal as rolling code. |
| Transmitter recognition code registration function | Enables registering (writing and storing) of 4 different transmitter recognition codes in EEPROM, which is built into multiplex network body ECU. |