Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › OCCUPANT CLASSIFICATION SYSTEM (for Separate Seat Type)

OCCUPANT CLASSIFICATION SYSTEM (for Separate Seat Type) > TERMINALS OF ECU

for Preparation Click here



OCCUPANT CLASSIFICATION ECU

H100909E05


Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specification
+B (O5-1) -
GND (O5-3)
R - W-B
Battery
Ignition switch on
10 to 14 V
DIA (O5-2) -
GND (O5-3)
W - W-B
Diagnosis (DLC3)
Ignition switch on
Pulse generation
GND (O5-3) -
Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
FSR- (O5-4) -
GND (O5-3)
B - W-B
Center airbag sensor assembly communication line (-)
Always
Below 1 Ω
BGND (O5-5) -
GND (O5-3)
P-G - W-B
Passenger side buckle switch ground line
Always
Below 1 Ω
IG (O5-7) -
GND (O5-3)
BE - W-B
Power source (IGN Fuse)
Ignition switch on
10 to 14 V
FSR+ (O5-8) -
FSR- (O5-4)
W - B
Center airbag sensor assembly communication line
Ignition switch on
Pulse generation
BSW (O5-9) -
BGND (O5-5)
G - P-G
Passenger side buckle switch line
Buckle switch ON
Buckle switch OFF
Pulse generation
SGD1 (O4-1) -
GND (O5-3)
L - W-B
Occupant classification sensor front LH ground line
Always
Below 1 Ω
SGD2 (O4-2) -
GND (O5-3)
BE - W-B
Occupant classification sensor front RH ground line
Always
Below 1 Ω
SGD3 (O4-3) -
GND (O5-3)
P-G - W-B
Occupant classification sensor rear LH ground line
Always
Below 1 Ω
SGD4 (O4-4) -
GND (O5-3)
B-R - W-B
Occupant classification sensor rear RH ground line
Always
Below 1 Ω
SVC1 (O4-11) -
SGD1 (O4-1)
B-L - L
Occupant classification sensor front LH power supply line
Ignition switch on, a load is applied to occupant classification sensor front LH
4.5 to 5.1 V
SVC2 (O4-12) -
SGD2 (O4-2)
LG-B - BE
Occupant classification sensor front RH power supply line
Ignition switch on, a load is applied to occupant classification sensor front RH
4.5 to 5.1 V
SVC3 (O4-5) -
SGD3 (O4-3)
B -P-G
Occupant classification sensor rear LH power supply line
Ignition switch on, a load is applied to occupant classification sensor rear LH
4.5 to 5.1 V
SVC4 (O4-6) -
SGD4 (O4-4)
GR-L - B-R
Occupant classification sensor rear RH power supply line
Ignition switch on, a load is applied to occupant classification sensor rear RH
4.5 to 5.1 V
SIG1 (O4-7) -
SGD1 (O4-1)
G - L
Occupant classification sensor front LH signal line
Ignition switch on, a load is applied to occupant classification sensor front LH
Pulse generation
SIG2 (O4-8) -
SGD2 (O4-2)
R-L - BE
Occupant classification sensor front RH signal line
Ignition switch on, a load is applied to occupant classification sensor front RH
Pulse generation
SIG3 (O4-9) -
SGD3 (O4-3)
R-B - P-G
Occupant classification sensor rear LH signal line
Ignition switch on, a load is applied to occupant classification sensor rear LH
Pulse generation
SIG4 (O4-10) -
SGD4 (O4-4)
L-R - B-R
Occupant classification sensor rear RH signal line
Ignition switch on, a load is applied to occupant classification sensor rear RH
Pulse generation