Home › ENGINE · 2TR-FE › ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL

ACCELERATOR PEDAL > INSPECTION

for Preparation Click here



1. INSPECT ACCELERATOR PEDAL ROD ASSEMBLY


G037692E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      5 (EP1) - 4 (VCP1)
      1M Ω or higher
      2 (EP2) - 1 (VCP2)
      1M Ω or higher

      If the result is not as specified, replace the accelerator pedal.