SEAT BELT WARNING SYSTEM > CUSTOMIZE PARAMETERS |
| COMBINATION METER ASSEMBLY |
| Item | Default | Contents | Setting |
| Seat belt warning buzzer | b-on | Function to turn on/off the seat belt warning buzzer | b-on, b-oFF |
| SEAT BELT BUZZER ON/OFF SETTING |
Driver and front passenger side seat belt buzzers
Turn the ignition switch ON (Procedure A).
Press the ODO/TRIP switch until the odometer displays "ODO".
Turn the ignition switch off.
Turn the ignition switch ON.
Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.
Continue holding down the ODO/TRIP switch and fasten the driver side seat belt.
Check that the odometer displays either "b-on" or "b-oFF".
Press the ODO/TRIP switch to change the display to "b-oFF".
Turn the ignition switch off.
Turn the ignition switch ON.
Check that no buzzer sounds when the vehicle speed is 20 km/h (12 mph) or more (Procedure B).
Front passenger side seat belt buzzer
Turn the ignition switch ON (Procedure A).
Press the ODO/TRIP switch until the odometer displays "ODO".
Turn the ignition switch off.
Turn the ignition switch ON.
Sit in the front passenger seat. Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.
Sit in the front passenger seat. Continue holding down the ODO/TRIP switch and fasten the front passenger side seat belt.
Check that the odometer displays either "b-on" or "b-oFF".
Press the ODO/TRIP switch to change the display to "b-oFF".
Turn the ignition switch off.
Turn the ignition switch ON.
Check that no buzzer sounds when the vehicle speed is 20 km/h (12 mph) or more (Procedure B).