Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

DTC    P0607    Input Signal Circuit Malfunction

for Preparation Click here


DESCRIPTION

This DTC indicates the internal abnormalities of the ECM.

DTC No.
DTC Detection condition
Trouble Area
P0607
The ECM has a supervisory CPU and a control ECU inside.
When each input STP signal is different for 0.15 seconds or more, this trouble code is output.
This trouble code is output after 0.4 seconds has passed from the time the cruise cancel input signal (STP input) is input into the ECM.
ECM

HINT:
When a trouble code is detected, fail-safe continues until the ignition switch is turned off.


INSPECTION PROCEDURE

1.REPLACE ECM

NEXT

END