Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Bench Seat Type)

FRONT SEAT ASSEMBLY (for Bench Seat Type) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    B121777
  1. Slide the front seat to the most forward position.

  1. Disengage the hook.

  1. Disconnect the 2 connectors.

  1. Using a clip remover, remove the wiring harness clamp.

  1. Remove the wiring harness clamp.

  1. Remove the bolt and the front seat inner belt.



3. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH


    B121778
  1. Slide the front seat to the most forward position.

  1. Disengage the hook.

  1. Disconnect the connector.

  1. Using a clip remover, remove the wiring harness clamp.

  1. Remove the wiring harness clamp.

  1. Remove the bolt and the front seat inner belt.



4. REMOVE FRONT SEAT HEADREST ASSEMBLY


    B121738E01
  1. Push in the 2 lock buttons of the 2 front seat headrest supports and remove the 2 front seat headrests.



5. REMOVE FRONT SEAT ASSEMBLY


    B121739
  1. Remove the belt of the front center seat outer belt from the front center seat outer belt guide.



    B203884
  1. Disconnect the 5 connectors.

  1. Using a clip remover, remove the 2 wiring harness clamps.



    B121741
  1. Remove the 4 bolts and the front seat.