Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Access Cab)

REAR SEAT ASSEMBLY (for Access Cab) > INSTALLATION

for Preparation Click here



1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY

HINT:
Use the same procedure for the side.

  1. Install the child restraint seat anchor bracket sub-assembly with the 2 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }

  1. Close the floor carpet.



2. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Install the 2 rear seat headrest assemblies with the 8 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



3. INSTALL BACK PANEL TRIM
  1. Engage the 8 claws and 14 clips, and install the back panel trim.

  1. Install the 2 clips.



4. INSTALL BACK PANEL TRIM COVER

HINT:
Follow the same procedure as for the opposite side.

  1. Engage the 4 claws and install the back panel trim cover.



5. INSTALL BACK PANEL GARNISH HOLE PLUG

HINT:
Follow the same procedure to install all hole plugs.

  1. Engage the 4 claws and install the 2 back panel garnish hole plugs.



6. INSTALL REAR SEAT CUSHION ASSEMBLY
  1. Install the 2 rear seat cushion assemblies with the 6 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }



7. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX


B200845
  1. Install the No. 1 speaker assembly with box with the 4 bolts.

    Torque:
    8.4 N*m{ 85 kgf*cm , 74 in.*lbf }

  1. Connect the speaker connector.



8. INSTALL NO. 2 SPEAKER MOUNTING COVER


B200852
  1. Engage the 2 clips to install the No. 2 speaker mounting cover.



9. INSTALL SPEAKER MOUNTING COVER


B203845
  1. Engage the 6 clips to install the speaker mounting cover.