Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Access Cab)

REAR SEAT ASSEMBLY (for Access Cab) > REMOVAL

for Preparation Click here



1. REMOVE SPEAKER MOUNTING COVER


B205286E01
  1. Spread the sides of the speaker mounting cover one at a time and pull it forward to disengage the ribs.



    B203845
  1. Disengage the 6 clips and remove the speaker mounting cover.



2. REMOVE NO. 2 SPEAKER MOUNTING COVER


B200852
  1. Disengage the 2 clips and remove the No. 2 speaker mounting cover.



3. REMOVE NO. 1 SPEAKER ASSEMBLY WITH BOX


B200845
  1. Disconnect the speaker connector.

  1. Remove the 4 bolts and the No. 1 speaker assembly with box.



4. REMOVE REAR SEAT CUSHION ASSEMBLY


    B203904
  1. Remove the 6 bolts and 2 rear seat cushion assemblies.



5. REMOVE BACK PANEL GARNISH HOLE PLUG


    E212020
  1. Remove the 2 clips.

  1. Disengage the 8 claws and 14 clips, and remove the back panel trim.



6. REMOVE BACK PANEL TRIM COVER

HINT:
Follow the same procedure as for the opposite side.



    E212090
  1. Disengage the 2 claws and the 2 guides, remove the back panel trim cover.



7. REMOVE BACK PANEL TRIM


    E212020
  1. Remove the 2 clips.

  1. Disengage the 8 claws and 14 clips, and remove the back panel trim.



8. REMOVE REAR SEAT HEADREST ASSEMBLY


    B203907
  1. Remove the 8 bolts and the 2 rear seat headrest assemblies.



9. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY

HINT:
B205931
Use the same procedure for each side.

  1. Remove the 2 bolts and child restraint seat anchor bracket.