Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Access Cab)

REAR SEAT ASSEMBLY (for Access Cab) > DISASSEMBLY

for Preparation Click here


HINT:
The procedure described below is for the LH side. Use the same procedure for both the LH and RH sides, unless otherwise specified.



1. REMOVE REAR SEATBACK COVER LH


    B292918
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the rear seatback cover LH.



2. REMOVE REAR SEATBACK LOCK COVER LH


    B203895
  1. Remove the 2 screws and rear seatback lock cover LH.



3. REMOVE REAR SEAT CUSHION UNDER COVER LH


    B203896
  1. Remove the screw and rear seat cushion under cover LH.



4. REMOVE REAR SEAT CUSHION COVER LH


    B203897
  1. Remove the screw and rear seat cushion cover LH.



5. REMOVE REAR SEAT HINGE SUB-ASSEMBLY LH


    B203898
  1. Remove the bolt and rear seat hinge sub- assembly LH.



6. REMOVE REAR SEAT LOCK HANDLE LH


    B203902E02
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the rear seat lock handle LH.
    Text in Illustration 
    *1
    Protective Tape



7. REMOVE REAR SEAT CUSHION SUPPORT BRACKET SUB-ASSEMBLY LH


    B203899
  1. Using T30 "TORX" socket wrench, remove the bolt.

  1. Remove the bolt and rear seat cushion support bracket sub-assembly LH.



8. REMOVE REAR SEAT LOCK ASSEMBLY


    B205930
  1. Remove the bolt and rear seat lock assembly.



9. REMOVE REAR SEAT CUSHION COVER


    B203900
  1. Disengage the hook.

  1. Remove the rear seat cushion cover.



10. REMOVE REAR SEAT CUSHION FRAME LH


    B203901
  1. Remove the rear seat cushion frame LH from the rear seat cushion pad LH.