REAR SEAT OUTER BELT ASSEMBLY (for Double Cab) > REMOVAL |
| 1. REMOVE REAR SEAT BACK HINGE COVER |
![]() |
Using a screwdriver with its tip taped in protective tape, disengage the 3 claws and remove the rear seat back hinge cover.
| 2. REMOVE REAR SEAT BACK ASSEMBLY |
![]() |
Remove the 2 bolts and rear seat back.
| 3. REMOVE REAR SEAT BACK HINGE SUB-ASSEMBLY |
![]() |
Remove the 2 bolts and rear seat back hinge.
| 4. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Disengage the 8 claws and remove the rear door scuff plate.
| 5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP |
![]() |
Separate the rear door opening trim weatherstrip to the extent which allows the removal of the quarter trim lower panel and quarter inside trim board.
| 6. REMOVE LUGGAGE COMPARTMENT SIDE TRAY |
![]() |
w/ Woofer:
Remove the bolt.
Disengage the 5 claws and 7 clips, and remove the luggage compartment side tray.
![]() |
w/o Woofer:
Remove the 3 bolts.
Disengage the 5 claws and 5 clips, and remove the luggage compartment side tray.
| 7. REMOVE QUARTER TRIM LOWER PANEL |
![]() |
Disengage the 2 claws and 2 clips, and remove the quarter trim lower panel.
| 8. REMOVE QUARTER INSIDE TRIM BOARD |
![]() |
Remove the bolt and remove the floor anchor of the rear seat outer belt.
![]() |
Using a screwdriver with its tip taped in protective tape, disengage the claw and open the cover.
![]() |
Remove the 3 screws.
Disengage the 2 clips and remove the quarter inside trim board.
| 9. REMOVE REAR SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt and shoulder anchor.
![]() |
Remove the 2 bolts and retractor.