Home › RESTRAINTS › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for Access Cab)

REAR SEAT OUTER BELT ASSEMBLY (for Access Cab) > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 SPEAKER ASSEMBLY WITH BOX
  1. Remove the No. 1 speaker assembly with box (Click here).



2. REMOVE REAR SEAT CUSHION ASSEMBLY


    B203904
  1. Remove the 6 bolts and 2 rear seat cushion assemblies.



3. REMOVE FRONT DOOR SCUFF PLATE


    B087436E01
  1. Disengage the 9 claws and clip, and remove the front door scuff plate.



4. REMOVE REAR DOOR SCUFF PLATE


    B087439E01
  1. Disengage the 7 claws and remove the rear door scuff plate.



5. REMOVE ROOF SIDE INNER GARNISH CAP


    B087441E01
  1. Using a "TORX" socket wrench T30, remove the 2 screws.

  1. Disengage the 4 claws and remove the roof side inner garnish cap.



6. REMOVE ROOF SIDE INNER GARNISH COVER

HINT:
Follow the same procedures as for the opposite side.



    B087440E03
  1. Using a screwdriver with its tip taped in protective tape, disengage the 2 claws and remove the roof side inner garnish cover.
    Text in Illustration 
    *1
    Protective Tape



7. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP


    B087599E01
  1. Separate the front door opening trim weatherstrip to the extent which allows the removal of the roof side garnish inner, quarter trim lower panel and quarter inside trim board.



8. REMOVE BACK PANEL GARNISH HOLE PLUG

HINT:
Follow the same procedure to remove all hole plugs.



    B205282
  1. Disengage the 4 claws and remove the 2 back panel garnish hole plugs.



9. REMOVE BACK PANEL TRIM


    E212020
  1. Remove the 2 clips.

  1. Disengage the 8 claws and 14 clips, and remove the back panel trim.



10. REMOVE QUARTER TRIM LOWER PANEL


    B205284
  1. Remove the bolt and floor anchor of the rear seat belt outer.



    B205285
  1. Disengage the claw and 2 clips, and remove the quarter trim lower panel.



11. REMOVE ROOF SIDE INNER GARNISH


    B087451E01
  1. Disengage the 2 claws and clip, and remove the roof side inner garnish.



12. REMOVE QUARTER INSIDE TRIM BOARD


    B087452E03
  1. Using a screwdriver with its tip taped in protective tape, disengage the claw and open the cover.
    Text in Illustration 
    *1
    Protective Tape



    B087453E01
  1. Remove the screw.

  1. Disengage the 3 clips and remove the quarter inside trim board.



13. REMOVE REAR SEAT OUTER BELT ASSEMBLY


    B087298E01
  1. Remove the bolt and shoulder anchor.



    B087299E01
  1. Remove the bolt and retractor.