Home › RESTRAINTS › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY (for Double Cab)

FRONT SEAT OUTER BELT ASSEMBLY (for Double Cab) > REMOVAL

for Preparation Click here


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (Click here).



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the air bag from working.


2. REMOVE FRONT DOOR SCUFF PLATE


    B087411E01
  1. Disengage the 9 claws and remove the front door scuff plate.



3. REMOVE REAR DOOR SCUFF PLATE


    B087412E01
  1. Disengage the 8 claws and remove the rear door scuff plate.



4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP


    B087335E01
  1. Separate the front door opening trim weatherstrip to the extent which allows the removal of the center pillar lower garnish and center pillar upper garnish.



5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP


    B087336E01
  1. Separate the rear door opening trim weatherstrip to the extent which allows the removal of the center pillar lower garnish and center pillar upper garnish.



6. REMOVE LAP BELT OUTER ANCHOR COVER


    B087415E01
  1. Disengage the 3 claws and remove the lap belt outer anchor cover.



7. REMOVE CENTER PILLAR LOWER GARNISH


    B087416E01
  1. Remove the bolt and floor anchor of the front seat outer belt.



    B087417E01
  1. Disengage the 2 claws and 2 clips, and remove the center pillar lower garnish.



8. REMOVE CENTER PILLAR UPPER GARNISH


    B087418E01
  1. Remove the 2 screws.

  1. Disengage the clip and remove the center pillar upper garnish.



9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY


    B087337E01
  1. Remove the nut and shoulder anchor.



    B087338E01
  1. Disconnect the pretensioner connector as shown in the illustration.

  1. Remove the bolt and retractor.



10. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


    B087339E01
  1. Remove the bolt.

  1. Disengage the 2 claws and remove the front shoulder belt anchor adjuster.