REAR CENTER SEAT OUTER BELT ASSEMBLY (for Double Cab) > REMOVAL |
| 1. REMOVE REAR SEAT BACK HINGE COVER |
![]() |
Using a screwdriver with its tip taped in protective tape, disengage the 3 claws and remove the rear seat back hinge cover.
| 2. REMOVE REAR SEAT BACK BOARD SUB-ASSEMBLY |
![]() |
Remove the 3 screws.
Disengage the 5 claws and remove the rear seat back board.
| 3. REMOVE REAR SEAT SHOULDER BELT COVER |
![]() |
Using a screwdriver with its tip taped with protective tape, disengage the 4 claws and remove the rear seat shoulder belt cover.
| 4. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt, floor anchor of the rear center seat outer belt and rear seat inner belt.
![]() |
Insert the belt through the hole into the rear seat back frame.
Remove the bolt and rear center seat outer belt.