Home › RESTRAINTS › SEAT BELT › FRONT CENTER SEAT OUTER BELT (for Bench Seat Type)

FRONT CENTER SEAT OUTER BELT (for Bench Seat Type) > REMOVAL

for Preparation Click here



1. REMOVE BACK PANEL TRIM COVER


    B087479E01
  1. Disengage the 6 claws and remove the back panel trim cover.

    HINT:
    Follow the same procedures as for the opposite side.



    B087478E01
  1. Disengage the 6 claws and remove the back panel trim cover.



2. REMOVE BACK PANEL UPPER GARNISH


    B087480E01
  1. Disengage the 4 claws and 5 clips, and remove the back panel upper garnish.



3. REMOVE SEAT BELT RETRACTOR COVER


    B087307E01
  1. Disengage the 4 clips and remove the seat retractor cover.



4. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    B087308E01
  1. Remove the 2 bolts and shoulder anchor.



    B087309E01
  1. Remove the 2 bolts and retractor.



5. REMOVE SEAT BELT BRACKET


    B087310E01
  1. Remove the 2 bolts and seat belt bracket.



6. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY


    B087311E01
  1. Remove the 2 bolts and tether anchor bracket.