Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Separate Seat Type)

FRONT SEAT INNER BELT ASSEMBLY (for Separate Seat Type) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH


    B087536E03
  1. for Separate Seat Type Driver Side:

    1. Check the resistance.

      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance:
        Tester Connection
        Condition
        Specified Condition
        1 - 2
        Fasten seat belt
        10 kΩ or higher
        1 - 2
        Release seat belt
        Below 1 Ω

        If the result is not as specified, replace the front seat inner belt.



    B087537E02
  1. for Separate Seat Type Front Passenger Side and Separate Folding Seat Type:

    1. Check the resistance.

      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance:
        Tester Connection
        Condition
        Specified Condition
        1 - 2
        Fasten seat belt
        10 kΩ or higher
        1 - 2
        Release seat belt
        Below 1 Ω

        If the result is not as specified, replace the front seat inner belt.