FRONT SEAT INNER BELT ASSEMBLY (for Separate Seat Type) > REMOVAL |
| 1. REMOVE CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE SEAT TRACK COVER |
for Separate Seat Type Driver Side:
Remove the seat track cover .
for Separate Seat Type Front Passenger Side:
Remove the seat track cover .
for Separate Folding Seat Type:
Remove the seat track cover .
| 3. REMOVE FRONT SEAT ASSEMBLY |
for Separate Seat Type Driver Side:
Remove the front seat assembly .
for Separate Seat Type Front Passenger Side:
Remove the front seat assembly .
for Separate Folding Seat Type:
Remove the front seat assembly .
| 4. REMOVE FRONT SEAT INNER BELT ASSEMBLY |
![]() |
for Separate Seat Type Driver Side:
Using a clip remover, remove the wire harness clamp and 2 connector clamps.
Remove the wire harness clamp.
Disconnect the seat position sensor connector.
Remove the nut and front seat inner belt.
![]() |
for Separate Seat Type Front Passenger Side and Separate Folding Seat Type:
Disconnect the seat wire connector.
Using a clip remover, remove the connector clamp.
Remove the wire harness clamp.
Remove the nut and front seat inner belt.