REAR SEAT ASSEMBLY (for LH Side) > REASSEMBLY |
| 1. INSTALL REAR SEAT BACK COVER |
![]() |
Using hog ring pliers, install the rear seat back cover with new hog rings.
| 2. INSTALL REAR SEAT LOCK HANDLE |
![]() |
Install the rear seat lock handle onto the rear seat back lock.
| 3. INSTALL REAR SEAT BACK LOCK ASSEMBLY |
![]() |
Install the rear seat back lock with the 2 bolts.
| 4. INSTALL REAR SEAT BACK FRAME SUB-ASSEMBLY |
![]() |
Install the rear seat back spring into the rear seat back pad.
Using hog ring pliers, install new hog rings.
| 5. INSTALL REAR SEAT HEADREST SUPPORT |
![]() |
Engage the 2 claws and install the front seat headrest support.
| 6. INSTALL REAR SEAT BACK BOARD SUB-ASSEMBLY |
![]() |
Engage the 4 claws and install the rear seat back board.
Tighten the 2 screws.
| 7. INSTALL REAR SEAT HEADREST ASSEMBLY |
![]() |
Disengage the lock button of the rear seat headrest support and install the rear seat headrest.
| 8. INSTALL REAR SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the rear seat cushion cover with new hog rings.
| 9. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY |
![]() |
Engage the hook and install the rear seat cushion frame.
| 10. INSTALL REAR SEAT CUSHION HINGE SUB-ASSEMBLY |
![]() |
Install the rear seat cushion hinge with the bolts.
| 11. INSTALL REAR SEAT HEADREST HOLDER |
![]() |
Engage the 2 claws and install the rear seat headrest holder.
| 12. INSTALL REAR SEAT CUSHION BAND |
![]() |
Install the rear seat cushion band with the screw.