Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR GRILLE


    E212056
  1. Remove the 2 screws.

  1. Using a clip remover, remove the 2 clips.

  1. Disengage the 8 guides and remove the radiator grille.



2. REMOVE FRONT BUMPER FILLER LH


    E212057
  1. Disengage the clip and guide, remove the front bumper filler.



3. REMOVE FRONT BUMPER FILLER RH

HINT:
Use the same procedure as for the LH side.



4. REMOVE FRONT BUMPER COVER


    E212058E01
  1. Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape



    E212059E01
  1. Using the screwdriver, remove the pin hold clip.

    HINT:
    Use the same procedure for the remaining parts.

  1. Remove the screw.

    HINT:
    Use the same procedure for the remaining parts.



    E212060
  1. Remove the 3 clips.



    E212061
  1. Remove the 2 bolts and the 4 screws.



    E212062
  1. Disengage the 2 claws, 2 guides and remove the front bumper cover.

  1. Disconnect the 2 fog light connectors.

    HINT:
    If the vehicle is equipped with fog lights, disconnect the connector.



    E212063
  1. Remove the 4 clips.



5. REMOVE FRONT SPOILER COVER LH (for X-Runner)


    E212064
  1. Remove the 6 retainers.



    E212065
  1. Using a clip remover, remove the 3 clips.

  1. Remove the retainer and the front spoiler cover.



6. REMOVE FRONT SPOILER COVER RH (for X-Runner)


    E212066
  1. Remove the 6 retainers.



    E212067
  1. Using a clip remover, remove the 2 clips.

  1. Remove the retainer and the front spoiler cover.



7. REMOVE FRONT BUMPER EXTENSION LH (for 4WD and Pre-Runner)


    E212068
  1. Remove the 7 retainers and the front bumper extension.



8. REMOVE FRONT BUMPER EXTENSION RH (for 4WD and Pre-Runner)

HINT:
Use the same procedure as for the LH side.



9. REMOVE FRONT BUMPER EXTENSION LH (for X-Runner)


    E212069
  1. Remove the 5 retainers and the front bumper extension.



10. REMOVE FRONT BUMPER EXTENSION RH (for X-Runner)

HINT:
Use the same procedure as for the LH side.



11. REMOVE LOWER RADIATOR GRILLE (for 4WD and Pre-Runner)


    E212070
  1. Remove the 5 retainers.

  1. Disengage the 13 claws and remove the lower radiator grille.



12. REMOVE LOWER RADIATOR GRILLE (for X-Runner)


    E212071
  1. Remove the 5 retainers.

  1. Disengage the 12 claws and remove the lower radiator grille.



13. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    E212073
  1. Remove the 2 screws.

  1. Disengage the 2 guides and remove the front bumper hole cover.



14. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:
Use the same procedure as for the LH side.



15. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    E212072
  1. Remove the 2 screws.

  1. Disengage the 2 guides and remove the fog light assembly.



16. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure as for the LH side.



17. REMOVE FOG LIGHT COVER LH


    E212074E01
  1. Remove the retainer.
    Text in Illustration 
    *1
    Retainer
    *2
    Guide

  1. Disengage the claw and 2 guides, remove the fog light cover.



18. REMOVE FOG LIGHT COVER RH

HINT:
Use the same procedure as for the LH side.



19. REMOVE FRONT BUMPER SIDE SUPPORT

HINT:
B087567E01
Follow the same procedures as for the opposite side.

  1. Remove the screw.

  1. Disengage the claw and remove the front bumper side support.



20. REMOVE HEADLIGHT ASSEMBLY LH


E212094
  1. Remove the bolt and 2 screws.

  1. Disengage the clamp and disconnect the 3 connectors to remove the headlight assembly.



21. REMOVE HEADLIGHT ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



22. REMOVE FRONT BUMPER UPPER CENTER RETAINER


    E212075
  1. Remove the 4 nuts and the front bumper upper center retainer.



23. REMOVE BUMPER FILLER RETAINER

HINT:
Follow the same procedures as for the opposite side.



    E212076
  1. Remove the screw and the bumper filler retainer.



24. REMOVE FRONT BUMPER REINFORCEMENT EXTENSION LH


    E212077
  1. Remove the 2 nuts and the front bumper reinforcement extension.



25. REMOVE FRONT BUMPER REINFORCEMENT EXTENSION RH

HINT:
Use the same procedure as for the LH side.



26. REMOVE FRONT BUMPER UPPER SIDE RETAINER

HINT:
Follow the same procedures as for the opposite side.



    B296046
  1. Disengage the 2 claws and remove the front bumper upper side retainer.



27. REMOVE FRONT BUMPER ARM MOUNTING BRACKET LH


    E212078
  1. Remove the 2 bolts and the front bumper arm mounting bracket.



28. REMOVE FRONT BUMPER ARM MOUNTING BRACKET RH

HINT:
Use the same procedure as for the LH side.



29. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    B087550E01
  1. Remove the 6 nuts and the front bumper reinforcement.



30. REMOVE FRONT BUMPER EXTENSION SUB-ASSEMBLY LH


    B087551E01
  1. Remove the 3 nuts and the front bumper extension.



31. REMOVE FRONT BUMPER EXTENSION SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.