OCCUPANT CLASSIFICATION ECU (for Separate Seat Type) > INSTALLATION |
| 1. INSTALL OCCUPANT CLASSIFICATION ECU |
Check that the ignition switch is OFF.
Check that the cable is disconnected from the battery negative (-) terminal is disconnected.
Engage the claw and install the occupant classification ECU.
Connect the connector to the occupant classification ECU.
| 2. INSTALL FRONT SEAT ASSEMBLY RH |
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. OCCUPANT CLASSIFICATION ECU INITIALIZATION |
| 5. INSPECT SRS WARNING LIGHT |