Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › FRONT BLOWER RESISTOR

FRONT BLOWER RESISTOR > INSPECTION

for Preparation Click here



1. INSPECT BLOWER RESISTOR


    I045067E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      1 (M1) - 3 (COMMON)
      0.792 to 0.968 Ω at 20°C (68°F)
      2 (M2) - 3 (COMMON)
      0.342 to 0.418 Ω at 20°C (68°F)
      4 (Lo) - 3 (COMMON)
      2.07 to 2.53 Ω at 20°C (68°F)

      If the result is not as specified, replace the blower resistor.