Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COOLER CONDENSER ASSEMBLY
  1. If the fins of the cooler condenser assembly are dirty, clean them with water and dry them with compressed air.

    NOTICE:
    Do not damage the fins of the condenser assembly.

  1. If the fins of the cooler condenser assembly are bent, straighten them using a screwdriver or pliers.



2. CHECK CONDENSER FOR REFRIGERANT LEAKAGE
  1. Check the pipe joints for gas leakage, using a halogen leak detector.

  1. Check the tightening torque of the joints if gas leakage is detected in any pipe joints.