AIR CONDITIONING AMPLIFIER > INSTALLATION |
| 1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY |
![]() |
Install the air conditioner amplifier assembly with the nut.
Connect the connector.
| 2. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER RH |
Engage the 2 clips and install the instrument panel lower finish panel sub-assembly RH.
Install the bolt <B>.
| 3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() |
Pull the bottom of the stopper.
![]() |
Attach the stopper to the glove compartment door as shown in the illustration.
![]() |
Install the glove compartment door assembly with 3 hinges, holding it horizontal.
![]() |
Slightly deform the upper part of the glove compartment door assembly, and install the glove compartment door assembly.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |