FRONT DOOR BELT MOULDING > INSTALLATION |
| 1. INSTALL FRONT DOOR BELT MOULDING |
![]() |
Engage the 5 claws and install a new front door belt moulding.
| 2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY |
![]() |
Engage the claw and install the outer rear view mirror.
Tighten the 3 nuts.
Connect the outer rear view mirror connector (w/ Power Mirror).
| 3. INSTALL FRONT DOOR TRIM PANEL ASSEMBLY |
w/ Power Window:
Install the front door trim panel assembly .
w/o Power Window:
Install the front door trim panel assembly .
| 4. INSTALL FRONT DOOR ARMREST BASE UPPER PANEL SUB-ASSEMBLY (w/ Power Window) |
for Double Cab:
Install the front door armrest base upper panel sub-assembly .
for Access Cab and Regular Cab:
Install the front door armrest base upper panel sub-assembly .
| 5. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) |
![]() |
Install the window regulator handle plate.
![]() |
Install the front door window regulator handle assembly with the snap ring.
| 6. INSTALL FRONT DOOR FRAME BRACKET LOWER GARNISH |
w/ Power Window:
Install the front door frame bracket lower garnish .
w/o Power Window:
Install the front door frame bracket lower garnish .
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |