FRONT SEAT ASSEMBLY (for Separate Folding Seat Type) > DISASSEMBLY |
| 1. REMOVE FRONT SEAT HEADREST ASSEMBLY |
![]() |
Disengage the lock button of the front seat headrest support and remove the front seat headrest.
| 2. REMOVE FRONT SEAT INNER BELT ASSEMBLY |
![]() |
Disconnect the seat wire connector.
Using a clip remover, remove the connector clamp.
Remove the wire harness clamp.
Remove the nut and front seat inner belt.
| 3. REMOVE FRONT SEAT CUSHION INNER SHIELD |
![]() |
Remove the screw.
Disengage the claw and clip, and remove the front seat cushion shield inner.
| 4. REMOVE RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Using a screwdriver with its tip taped in protective tape, disengage the claw and remove the reclining adjuster release handle.
| 5. REMOVE FRONT SEAT CUSHION SHIELD |
![]() |
Remove the screw.
Disengage the 2 claws and clip, and remove the front seat cushion shield.
| 6. REMOVE RECLINING ADJUSTER RELEASE KNOB LH |
![]() |
Using a screwdriver with its tip taped in protective tape, disengage the claw and remove the reclining adjuster release knob.
| 7. REMOVE RECLINING ADJUSTER RELEASE KNOB RH |
| 8. REMOVE FRONT SEAT BACK SHIELD LH |
![]() |
Remove the screw.
Disengage the 3 claws and remove the front seat back shield.
| 9. REMOVE FRONT SEAT BACK SHIELD RH |
![]() |
Using a clip remover, remove the connector clamp.
Remove the wire harness clamp.
![]() |
Remove the screw.
Disengage the 3 claws and remove the front seat back shield.
![]() |
Disengage the 4 claws and remove the front seat side air bag wire.
| 10. REMOVE FRONT SEAT BACK ASSEMBLY |
![]() |
Remove the 4 bolts and front seat back.
| 11. REMOVE FRONT SEAT BACK BOARD |
![]() |
Disengage the 2 claws and 2 clips, and remove the front seat back board.
| 12. REMOVE FRONT SEAT BACK LOCK SUB-ASSEMBLY LH |
![]() |
Remove the 2 bolts and front seat back lock.
| 13. REMOVE FRONT SEAT BACK LOCK SUB-ASSEMBLY RH |
| 14. REMOVE FRONT SEAT HINGE COVER LH |
![]() |
Remove the seat hinge cover.
| 15. REMOVE FRONT SEAT HINGE COVER RH |
| 16. REMOVE FRONT SEAT BACK LOCK HANDLE ROD |
![]() |
Remove the front seat back lock handle rod.
| 17. REMOVE FRONT SEAT HEADREST SUPPORT |
![]() |
Disengage the 2 claws and remove the front seat headrest support.
| 18. REMOVE FRONT SEAT BACK SPRING ASSEMBLY |
![]() |
Remove the bolt and inner hook.
Remove the 10 hog rings.
Remove the hook tape.
Remove the front seat back spring from the front seat back pad.
| 19. REMOVE UPPER ACTIVE HEADREST UNIT |
![]() |
Remove the 5 nuts.
Disengage the lower active headrest unit cable and remove the upper active headrest unit.
| 20. REMOVE LOWER ACTIVE HEADREST UNIT |
![]() |
Remove the 2 nuts and remove the lower active headrest unit.
| 21. REMOVE FRONT SEAT BACK COVER |
![]() |
Remove the 10 hog rings and front seat back cover.
| 22. REMOVE FRONT SEAT CUSHION ASSEMBLY |
![]() |
Remove the 4 hog rings.
Remove the front seat cushion cover from the front seat frame adjuster.
![]() |
Disengage the 2 claws and 3 hooks, and remove the front seat cushion pad together with the front seat cushion cover.
| 23. REMOVE FRONT SEAT CUSHION COVER |
![]() |
Remove the 12 hog rings and front seat cushion cover.
| 24. REMOVE RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Remove the screw and reclining adjuster inside cover.
| 25. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
| 26. REMOVE RECLINING ADJUSTER OUTSIDE COVER LH |
![]() |
Remove the screw and reclining adjuster outside cover.
| 27. REMOVE RECLINING ADJUSTER OUTSIDE COVER RH |
| 28. REMOVE OCCUPANT CLASSIFICATION ECU |
![]() |
Disconnect the 2 connectors.
Disengage the claw and remove the occupant classification ECU.
| 29. REMOVE SEAT WIRE |
![]() |
Disconnect the 4 connectors.
Using a clip remover, remove the 3 wire harness clamps and connector clamp.