FRONT SEAT ASSEMBLY (for Separate Folding Seat Type) > REASSEMBLY |
| 1. INSTALL SEAT WIRE |
![]() |
Install the 3 wire harness clamps and connector clamp.
Connect the 4 connectors.
| 2. INSTALL OCCUPANT CLASSIFICATION ECU |
![]() |
Engage the claw and install the occupant classification ECU.
Connect the 2 connectors.
| 3. INSTALL RECLINING ADJUSTER OUTSIDE COVER LH |
![]() |
Install the reclining adjuster outside cover with the screw.
| 4. INSTALL RECLINING ADJUSTER OUTSIDE COVER RH |
| 5. INSTALL RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Install the reclining adjuster inside cover with the screw.
| 6. INSTALL RECLINING ADJUSTER INSIDE COVER RH |
| 7. INSTALL FRONT SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the front seat cushion cover with new hog rings.
| 8. INSTALL FRONT SEAT CUSHION ASSEMBLY |
![]() |
Engage the 2 claws and 3 hooks, and install the front seat cushion.
![]() |
Hook the front seat cushion cover to the front seat with adjuster frame.
Using hog ring pliers, install new hog rings.
| 9. INSTALL FRONT SEAT BACK COVER |
![]() |
Using hog ring pliers, install the front seat back cover with new hog rings.
| 10. INSTALL LOWER ACTIVE HEADREST UNIT |
![]() |
Install the lower active headrest unit with the 2 nuts.
| 11. INSTALL UPPER ACTIVE HEADREST UNIT |
![]() |
Connect the lower active headrest unit cable.
Install the upper active headrest with the 5 nuts.
| 12. INSTALL FRONT SEAT BACK SPRING ASSEMBLY |
![]() |
Install the front seat back spring into the front seat back pad.
Install the hook tape.
Using hog ring pliers, install new hog rings.
Fully cover the air bag with the inner hook and tighten the bolt.
| 13. INSTALL FRONT SEAT HEADREST SUPPORT |
![]() |
Engage the 2 claws and install the front seat headrest support.
| 14. INSTALL FRONT SEAT BACK LOCK HANDLE ROD |
![]() |
Install the front seat back lock handle rod.
| 15. INSTALL FRONT SEAT HINGE COVER LH |
![]() |
Engage the 2 claws and install the front seat hinge cover.
| 16. INSTALL FRONT SEAT HINGE COVER RH |
| 17. INSTALL FRONT SEAT BACK LOCK SUB-ASSEMBLY LH |
![]() |
Install the front seat back lock with the 2 bolts.
| 18. INSTALL FRONT SEAT BACK LOCK SUB-ASSEMBLY RH |
| 19. INSTALL FRONT SEAT BACK BOARD |
![]() |
Engage the 2 claws and 2 clips, and install the front seat back board.
| 20. INSTALL FRONT SEAT BACK ASSEMBLY |
![]() |
Install the front seat back with the 4 bolts.
| 21. INSTALL FRONT SEAT BACK SHIELD LH |
![]() |
Engage the 3 claws and install the front seat back shield.
Tighten the screw.
| 22. INSTALL FRONT SEAT BACK SHIELD RH |
![]() |
The front seat side air bag wire must pass between the protector plate and the front seat back shield.
![]() |
Engage the 4 claws and install the front seat side air bag wire.
![]() |
Engage the 3 claws and install the front seat back shield.
Tighten the screw.
![]() |
Install the wire harness clamp and connector clamp.
| 23. INSTALL RECLINING ADJUSTER RELEASE KNOB LH |
![]() |
Engage the claw and install the reclining adjuster release handle.
| 24. INSTALL RECLINING ADJUSTER RELEASE KNOB RH |
| 25. INSTALL FRONT SEAT CUSHION SHIELD |
![]() |
Engage the 2 claws and clip, and install the front seat cushion shield.
Tighten the screw.
| 26. INSTALL RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Engage the claw and install the reclining adjuster release handle.
| 27. INSTALL FRONT SEAT CUSHION INNER SHIELD |
![]() |
Engage the claw and clip, and install the front seat cushion inner shield.
Tighten the screw.
| 28. INSTALL FRONT SEAT INNER BELT ASSEMBLY |
![]() |
Install the front seat inner belt with the nut.
Check that the front seat inner belt rotates smoothly.
Install the wire harness clamp and connector clamp.
Connect the seat wire No. 1 connector.
| 29. INSTALL FRONT SEAT HEADREST ASSEMBLY |
![]() |
Disengage the lock button of the front seat headrest support and install the front seat headrest.