FRONT SEAT ASSEMBLY (for Separate Seat Type Front Passenger Side) > REASSEMBLY |
| 1. INSTALL SEAT WIRE |
![]() |
Install the 3 wire harness clamps and connector clamp.
Connect the 4 connectors.
| 2. INSTALL OCCUPANT CLASSIFICATION ECU |
![]() |
Engage the claw and install the occupant classification ECU.
Connect the 2 connectors.
| 3. INSTALL RECLINING ADJUSTER OUTSIDE COVER LH |
![]() |
Install the reclining adjuster outside cover with the screw.
| 4. INSTALL RECLINING ADJUSTER OUTSIDE COVER RH |
| 5. INSTALL RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Engage the claw and install the reclining adjuster inside cover.
Tighten the screw.
| 6. INSTALL RECLINING ADJUSTER INSIDE COVER RH |
| 7. INSTALL FRONT SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the front seat cushion cover with new hog rings.
![]() |
Engage the 3 hooks and 2 claws, and install the front seat cushion pad together with the front seat cushion cover.
Using hog ring pliers, install new hog rings.
Hook the front seat cushion cover to the front seat frame adjuster.
| 8. INSTALL LOWER ACTIVE HEADREST UNIT |
![]() |
Install the lower active headrest unit with the 2 nuts.
| 9. INSTALL UPPER ACTIVE HEADREST UNIT |
![]() |
Connect the lower active headrest unit cable.
Install the upper active headrest with the 5 nuts.
| 10. INSTALL FRONT SEAT BACK COVER |
![]() |
Install the front seat back pad onto the front seat frame adjuster.
Using hog ring pliers, install the front seat back cover with new hog rings.
Attach straps and tighten the nut.
Roll the front seat back cover down and install the 2 wires.
Using hog ring pliers, install new hog rings.
| 11. INSTALL FRONT SEAT HEADREST SUPPORT |
![]() |
Engage the 2 claws and install the front seat headrest support.
![]() |
Using hog ring pliers, install the new hog rings.
Install the wire harness clamp and connector clamp.
| 12. INSTALL FRONT SEAT CUSHION SHIELD |
![]() |
Engage the 2 claws and clip, and install the front seat cushion shield.
Tighten the screw.
| 13. INSTALL RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Engage the claw and install the reclining adjuster release handle.
| 14. INSTALL FRONT SEAT CUSHION INNER SHIELD |
![]() |
Engage the claw and clip, and install the front seat cushion inner shield.
Tighten the screw.
| 15. INSTALL FRONT SEAT INNER BELT ASSEMBLY |
![]() |
Install the front seat inner belt with the nut.
Check that the front seat inner belt rotates smoothly.
Install the wire harness clamp and connector clamp.
Connect the seat wire No. 1 connector.
| 16. INSTALL FRONT SEAT HEADREST ASSEMBLY |
![]() |
Disengage the lock button of the front seat headrest support and install the front seat headrest.