Home › SUSPENSION & AXLE › SUSPENSION › FRONT UPPER SUSPENSION ARM (for 2WD)

FRONT UPPER SUSPENSION ARM (for 2WD) > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT SUSPENSION UPPER ARM BUSH


F051493
  1. Using a hammer and chisel, raise the flange of the bushing diagonally as shown in the illustration.



    F051483E01
  1. Using SST, remove the upper arm bush.

    SST
    09950-40011   (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
    09950-60010   (09951-00380)

  1. The removal procedure for the rear side is the same as that for the front side.