Home › SUSPENSION & AXLE › SUSPENSION › REAR STABILIZER BAR (for Sport Suspension Package)

REAR STABILIZER BAR (for Sport Suspension Package) > INSTALLATION

for Preparation Click here



1. INSTALL REAR STABILIZER BAR


F051246E01
  1. Install the 2 stabilizer bushes onto the stabilizer bar.

    HINT:
    Install the stabilizer bush onto the outer side of the mark on the stabilizer bar.



    F051245
  1. Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.

    Torque:
    27 N*m{ 275 kgf*cm , 20 ft.*lbf }



2. INSTALL REAR STABILIZER LINK ASSEMBLY LH


F051244
  1. Install the stabilizer link with the 2 nuts.

    Torque:
    65 N*m{ 663 kgf*cm , 48 ft.*lbf }

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.



3. INSTALL REAR STABILIZER LINK ASSEMBLY RH

NOTICE:
The installation procedure for the RH side is the same as that for the LH side.



4. INSTALL REAR WHEEL

Torque:
113 N*m{ 1152 kgf*cm , 83 ft.*lbf }