REAR LEAF SPRING > INSTALLATION |
| 1. INSTALL REAR SPRING SHACKLE SUB-ASSEMBLY NO. 2 |
![]() |
Install the shackle with the through bolt, washer and nut.
| 2. INSTALL REAR LEAF SPRING |
Place the spring in the rear axle housing.
Align the hole of the rear axle housing with the head of the spring center bolt.
![]() |
Install the through bolt, washer and nut.
![]() |
Install the through bolt, washer and nut.
| 3. INSTALL REAR SPRING U BOLT (for 2WD) |
![]() |
Install the spring seat, 2 U-bolts, 4 washers and 4 nuts.
| 4. INSTALL REAR SPRING U BOLT (for 4WD and Pre-Runner) |
Install the spring bumper.
![]() |
Install the spring seat, 2 U-bolts, 4 washers and 4 nuts.
| 5. INSTALL REAR SPRING BUMPER NO. 1 (for 2WD) |
![]() |
Install the spring bumper with the 2 nuts.
| 6. INSTALL PARKING BRAKE CABLE ASSEMBLY NO. 3 |
![]() |
Install the parking brake cable with the bolt.
| 7. INSTALL REAR SHOCK ABSORBER |
![]() |
Install the shock absorber with the bolt, nut and washer.
| 8. INSTALL REAR WHEEL |
| 9. STABILIZE SUSPENSION |
Jack down the vehicle.
Bounce the vehicle up and down several times to stabilize the suspension.
| 10. FULLY TIGHTEN REAR SUSPENSION |
Tighten the nuts and bolts of the rear suspension parts.
| Part Tightened | N*m | kgf*cm | ft.*lbf |
| Rear LH spring x Rear spring shackle | 120 | 1224 | 89 |
| Rear LH spring x Frame | 120 | 1224 | 89 |
| Rear spring shackle x Frame | 120 | 1224 | 89 |
| Rear shock absorber x Rear spring seat (2WD) | 58 | 591 | 43 |
| Rear shock absorber x Rear axle housing (4WD and Pre-Runner) | 58 | 591 | 43 |
| 11. INSTALL SPARE TIRE (for 4WD and Pre-Runner) |