REAR LEAF SPRING > REMOVAL |
| 1. REMOVE REAR WHEEL |
| 2. REMOVE SPARE TIRE (for 4WD and Pre-Runner) |
| 3. SEPARATE REAR SHOCK ABSORBER |
![]() |
Support the rear axle housing.
Remove the bolt, nut and washer.
for 2WD:
Separate the shock absorber from the rear spring seat.
for 4WD and Pre-Runner:
Separate the shock absorber from the rear axle housing.
| 4. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO. 3 |
![]() |
Remove the bolt, then separate the parking brake cable.
| 5. REMOVE REAR SPRING BUMPER NO. 1 (for 2WD) |
![]() |
Remove the 2 nuts and spring bumper.
| 6. REMOVE REAR SPRING U BOLT (for 2WD) |
![]() |
Remove the 4 nuts and 4 washers.
Remove the spring seat and 2 U-bolts.
| 7. REMOVE REAR SPRING U BOLT (for 4WD and Pre-Runner) |
![]() |
Remove the 4 nuts and 4 washers.
Remove the spring seat and 2 U-bolts.
Remove the spring bumper.
| 8. REMOVE REAR LEAF SPRING |
![]() |
Remove the nut, washer and through bolt.
![]() |
Remove the nut, washer and through bolt.
Remove the spring.
| 9. REMOVE REAR SPRING SHACKLE SUB-ASSEMBLY NO. 2 |
![]() |
Remove the nut, washer, through bolt and shackle.