TRANSFER OIL > ADJUSTMENT |
| 1. INSPECT TRANSFER OIL |
![]() |
Remove the filler plug and gasket.
Check that the oil level is within 5 mm (0.20 in.) of the bottom of the filler plug hole.
When the oil level is too low, check for oil leakage.
Tighten the filler plug with a new gasket.
| 2. ADJUST TRANSFER OIL |
Remove the filler plug and gasket then supply oil.
After leaving it alone for 5 minutes, check the oil level again.
Tighten the filler plug with a new gasket.