EXTENSION HOUSING OIL SEAL > REMOVAL |
| 1. DRAIN TRANSFER OIL |
| 2. REMOVE PROPELLER SHAFT ASSEMBLY (for Regular Cab) |
![]() |
Place matchmarks on the propeller shaft flange and differential flange.
Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.
![]() |
Place matchmarks on the propeller shaft flange and transfer flange.
Remove the 4 nuts, 4 washers and front propeller shaft.
| 3. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for Except Regular Cab) |
![]() |
Place matchmarks on the propeller shaft flange and differential.
Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.
![]() |
Remove the 2 center support bearing bolts from the frame crossmember.
![]() |
Place matchmarks on the propeller shaft flange and transfer flange.
Remove the 4 nuts, 4 washers and front propeller shaft.
| 4. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY |
Remove the rear output shaft companion flange sub-assembly using the same procedure as for the front output shaft companion flange sub-assembly (rear side).
| 5. REMOVE TRANSFER EXTENSION HOUSING TYPE T OIL SEAL |
![]() |
Using SST, remove the oil seal.