Home › DRIVE LINE › VF2BM TRANSFER › TRANSFER SYSTEM

TRANSFER SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.


 
Symptom
Suspected Area
See page
Noise
1. Oil (Level low)
Click here
2. Oil (Wrong)
Click here
3. Transfer faulty
Click here
Oil leakage
1. Oil (Level too high)
Click here
2. Gasket (Damaged)
Click here
3. Oil seal (Worn or damaged)
Click here
4. O-ring (Worn or damaged)
Click here
Tight corner braking
1. Transfer faulty
Click here
Shift from 4WD (H4) to 4WD (L4) impossible
1. Four wheel drive control switch
Click here
2. Wire harness
-
3. Four wheel drive control ECU
Click here
Shift from 4WD (L4) to 4WD (H4) impossible
1. Four wheel drive control switch
Click here
2. Wire harness
-
3. Four wheel drive control ECU
Click here