Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR


2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    D027745E02
  1. Using a screwdriver, unstake the lock washer.
    Text in Illustration 
    *1
    Lock Washer

  1. Remove the nut, lock washer and grommet.

  1. Remove the bolt and the park/neutral position switch assembly.

    HINT:
    Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.