EXTENSION HOUSING REAR OIL SEAL > REMOVAL |
| 1. REMOVE PROPELLER SHAFT ASSEMBLY (for Regular Cab) |
![]() |
Place matchmarks on the propeller shaft flange and differential flange.
Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.
![]() |
Remove the propeller shaft.
Insert SST into the transmission to prevent oil leakage.
| 2. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for Except Regular Cab) |
![]() |
Place matchmarks on the propeller shaft flange and differential flange.
Remove the 4 nuts, 4 bolts and 4 washers, and remove the propeller shaft.
![]() |
Remove the 2 center support bearing bolts from the frame crossmember.
![]() |
Pull out the propeller shaft.
Insert SST into the transmission to prevent oil leakage.
| 3. DRAIN AUTOMATIC TRANSMISSION FLUID |
Remove the drain plug, gasket and drain ATF.
Install a new gasket and drain plug.
| 4. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL |
![]() |
Using SST, remove the oil seal.