FLOOR SHIFT ASSEMBLY > REMOVAL |
| 1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Separate Seat Type) |
![]() |
Remove the shift knob.
Disengage the 6 clips and claw, and remove the console upper rear panel sub-assembly.
| 2. REMOVE REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) |
![]() |
Remove the console box carpet.
![]() |
Remove the 2 screws <F> and 2 bolts <B>.
Disengage the 4 claws and remove the rear console box assembly.
| 3. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (for Separate Seat Type) |
![]() |
Remove the 2 instrument panel cup holders.
![]() |
Disengage the 2 clips and 4 claws, and remove the instrument panel cup holder tray.
| 4. REMOVE FRONT CONSOLE BOX (for Separate Seat Type) |
![]() |
Remove the 2 screws <F>.
Disengage the 2 clips and claw, and remove the front console box.
| 5. REMOVE FRONT CONSOLE BOX (for Bench Seat Type) |
![]() |
Remove the shift knob.
Remove the box bottom mat.
Remove the 2 instrument panel cup holders.
![]() |
Remove the clip and 2 bolts <A>.
Disengage the 2 clips and claw, and remove the front console box.
| 6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
CABLE TYPE:
Disconnect the transmission control cable assembly from the shift lever assembly.
Remove the clip and disconnect the transmission control cable.
| 7. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY |
![]() |
ROD TYPE:
Remove the nut, then separate the floor shift gear shifting rod.
| 8. REMOVE FLOOR SHIFT ASSEMBLY |
![]() |
Disconnect the 2 connectors and 2 clamps.
Remove the 4 bolts and floor shift assembly.