FLOOR SHIFT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE UPPER POSITION INDICATOR HOUSING |
![]() |
Release the 4 claws with a screwdriver and remove the position indicator housing and slide cover.
| 2. REMOVE INDICATOR LAMP WIRE SUB-ASSEMBLY |
![]() |
Remove the indicator lamp wire sub-assembly.
Remove the bulb from the indicator lamp wire sub-assembly.
| 3. REMOVE SHIFT LOCK RELEASE BUTTON |
| 4. REMOVE LOWER POSITION INDICATOR HOUSING |
![]() |
CABLE TYPE:
Release the 5 claws with a screwdriver and remove the position indicator housing lower.
![]() |
ROD TYPE:
Release the 3 claws with a screwdriver and remove the position indicator housing lower.
| 5. REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY |
![]() |
Remove the shift lever nut and shift lever lock pin.
Remove the shift lever guide housing.
Release the 2 claws with a screwdriver and remove the shift lock release link and spring.
Remove the 2 screws and the shift lock control ECU.