Home › TRANSMISSION ยท A750E AUTOMATIC TRANSMISSION › TRANSMISSION CONTROL CABLE

TRANSMISSION CONTROL CABLE > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B290397
  1. Remove the shift knob.

  1. Disengage the 6 clips and claw, and remove the console upper rear panel sub-assembly.



2. REMOVE REAR CONSOLE BOX ASSEMBLY


    B290398
  1. Remove the console box carpet.



    B290399
  1. Remove the 2 screws <F> and 2 bolts <B>.

  1. Disengage the 4 claws and remove the rear console box assembly.



3. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY


    B290400
  1. Remove the 2 instrument panel cup holders.



    B290401
  1. Disengage the 2 clips and 4 claws, and remove the instrument panel cup holder tray.



4. REMOVE FRONT CONSOLE BOX


    E232344
  1. Remove the 2 screws <F>.

  1. Disengage the 2 clips and claw, and remove the front console box.



5. REMOVE VOLTAGE INVERTER ASSEMBLY (w/ Voltage Inverter)


    E211999
  1. Remove the bolt.

  1. Disconnect the 2 connectors and disengage the 2 wire harness clamps.



    E212000
  1. Remove the 4 bolts and voltage inverter assembly.



6. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


F050833
  1. Disconnect the transmission control cable assembly from the shift lever assembly.

  1. Remove the clip and disconnect the transmission control cable.



    F050834
  1. Remove the 2 nuts and disconnect the transmission control cable assembly from the body.



    F050835
  1. Remove the nut and disconnect the transmission control cable assembly from the body.



    F050822
  1. Remove the clip and transmission control cable bracket.

  1. Remove the nut and transmission control cable assembly.