Home › TRANSMISSION ยท A750F AUTOMATIC TRANSMISSION › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B290397
  1. Remove the shift knob.

  1. Disengage the 6 clips and claw, and remove the console upper rear panel sub-assembly.



2. REMOVE REAR CONSOLE BOX ASSEMBLY


    B290398
  1. Remove the console box carpet.



    B290399
  1. Remove the 2 screws <F> and 2 bolts <B>.

  1. Disengage the 4 claws and remove the rear console box assembly.



3. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY


    B290400
  1. Remove the 2 instrument panel cup holders.



    B290401
  1. Disengage the 2 clips and 4 claws, and remove the instrument panel cup holder tray.



4. REMOVE FRONT CONSOLE BOX


    E232344
  1. Remove the 2 screws <F>.

  1. Disengage the 2 clips and claw, and remove the front console box.



5. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


F050833
  1. CABLE TYPE:

    1. Disconnect the transmission control cable assembly from the shift lever assembly.

    2. Remove the clip and disconnect the transmission control cable.



6. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


F051629
  1. ROD TYPE:

    1. Remove the nut, then separate the floor shift gear shifting rod.



7. REMOVE FLOOR SHIFT ASSEMBLY


F051622
  1. Disconnect the 2 connectors and 2 clamps.

  1. Remove the 4 bolts and floor shift assembly.