FLOOR SHIFT ASSEMBLY > REASSEMBLY |
| 1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY |
![]() |
Install the shift lock control ECU with the 2 screws.
Install the spring and shift lock release link.
Install the shift lever guide housing.
Install the lever lock and new shift lever nut.
| 2. INSTALL POSITION INDICATOR HOUSING LOWER |
![]() |
CABLE TYPE:
Install the position indicator housing lower.
ROD TYPE:
![]() |
Install the position indicator housing lower.
| 3. INSTALL SHIFT LOCK RELEASE BUTTON |
| 4. INSTALL INDICATOR LAMP WIRE SUB-ASSEMBLY |
![]() |
Install the bulb into the indicator lamp wire sub-assembly.
Install the indicator lamp wire sub-assembly.
| 5. INSTALL POSITION INDICATOR HOUSING UPPER |
![]() |
Install the slide cover and position indicator housing sub-assembly onto the shift lever guide housing.