PROPELLER SHAFT ASSEMBLY (for Access Cab 4WD and Double Cab 4WD) > REMOVAL |
| 1. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY |
![]() |
Place matchmarks on the propeller shaft flange and differential.
Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.
![]() |
Remove the 2 center support bearing bolts from the frame crossmember.
![]() |
Place matchmarks on the propeller shaft flange and transfer flange.
Remove the 4 nuts, 4 washers and front propeller shaft.