PROPELLER SHAFT ASSEMBLY (for Access Cab 2WD and Double Cab 2WD) > INSTALLATION |
| 1. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY |
![]() |
Remove SST from the extension housing.
Install the propeller shaft into the extension housing.
![]() |
Align the matchmarks on the propeller shaft flange and differential flange.
Install the propeller shaft with the 4 bolts, 4 nuts and 4 washers.
![]() |
Provisionally install the center support bearing with the 2 mounting bolts.
![]() |
Adjust the center support bearing.
Torque the 2 bolts.
| 2. INSPECT TRANSMISSION OIL LEAKAGE |