Home › DRIVE LINE › PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for Regular Cab 2WD)

PROPELLER SHAFT ASSEMBLY (for Regular Cab 2WD) > INSTALLATION

for Preparation Click here



1. INSTALL PROPELLER SHAFT ASSEMBLY


D033911E01
  1. Remove SST from the extension housing.

  1. Install the propeller shaft assembly into the extension housing.



    C060588E01
  1. Align the matchmarks on the propeller shaft flange and differential flange.

  1. Install the propeller shaft assembly with the 4 bolts, 4 nuts and 4 washers.

    Torque:
    88 N*m{ 899 kgf*cm , 65 ft.*lbf }



2. INSPECT TRANSMISSION OIL LEAKAGE