Home › BODY ELECTRICAL › HORN › HORN SYSTEM

HORN SYSTEM > INSTALLATION

for Preparation Click here



1. INSTALL HIGH PITCHED HORN ASSEMBLY


E075960
  1. Place the stay onto the baffle part in the upper radiator support, and then install the horn with the bolt.

    Torque:
    9.9 N*m{ 101 kgf*cm , 88 in.*lbf }

  1. Connect the connector.



2. INSTALL LOW PITCHED HORN ASSEMBLY
  1. Place the stay onto the baffle part in the upper radiator support, and then install the horn with the bolt.

    Torque:
    9.9 N*m{ 101 kgf*cm , 88 in.*lbf }

  1. Connect the connector.



3. INSTALL RADIATOR GRILLE
  1. Engage the 8 guides and install the radiator grille.

  1. Install the 2 clips.

  1. Tighten the 2 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }