Home › BODY ELECTRICAL › HORN › HORN SYSTEM

HORN SYSTEM > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE RADIATOR GRILLE


    E212056
  1. Remove the 2 screws.

  1. Using a clip remover, remove the 2 clips.

  1. Disengage the 8 guides and remove the radiator grille.



3. REMOVE HIGH PITCHED HORN ASSEMBLY


E075960
  1. Disconnect the connector.

  1. Remove the bolt and horn.



4. REMOVE LOW PITCHED HORN ASSEMBLY