Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY
  1. Engage the 6 claws and install the hazard warning signal switch assembly.



2. INSTALL NO. 2 RADIO BRACKET
  1. Install the No. 2 radio bracket with the 4 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }



3. INSTALL NO. 1 RADIO BRACKET
  1. Install the No. 1 radio bracket with the 4 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }



4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
  1. Connect all the connectors.

  1. Connect the plug.

  1. Engage the 5 clips and install the radio receiver assembly with bracket.

  1. Install the 4 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    E212050
  1. Connect the 2 connectors.

  1. Engage the 4 clips and install the air conditioning control assembly.