RADIO RECEIVER > REMOVAL |
| 1. REMOVE AIR CONDITIONING CONTROL ASSEMBLY |
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 clips and remove the air conditioner control assembly.
| *1 | Protective Tape |
Disconnect the 2 connectors.
| 2. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET |
![]() |
Remove the 4 bolts.
Disengage the 5 clips and remove the radio receiver assembly with bracket.
Disconnect the plug.
Disconnect all the connectors.
| 3. REMOVE NO. 1 RADIO BRACKET |
![]() |
Remove the 4 bolts and the No. 1 radio bracket.
| 4. REMOVE NO. 2 RADIO BRACKET |
![]() |
Remove the 4 bolts and the No. 2 radio bracket.
| 5. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY |
![]() |
Disengage the 6 claws and remove the hazard warning signal switch assembly.