NAVIGATION ECU > REMOVAL |
| 1. REMOVE AIR CONDITIONING CONTROL ASSEMBLY |
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 clips and remove the air conditioner control assembly.
| *1 | Protective Tape |
Disconnect the 2 connectors.
| 2. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET |
![]() |
Remove the 4 bolts.
Disengage the 5 clips and remove the radio and display receiver assembly with bracket.
Disconnect all the connectors.
| 3. REMOVE NO. 1 RADIO BRACKET |
![]() |
Remove the 6 bolts and the No. 1 radio bracket.
| 4. REMOVE NO. 2 RADIO BRACKET |
![]() |
Remove the 6 bolts and the No. 2 radio bracket.
| 5. REMOVE EXTENSION MODULE |
![]() |
Disconnect the 3 connectors and remove the navigation wire.
![]() |
Disconnect the connector and remove the extension module.