Home › BODY ELECTRICAL › AUDIO / VISUAL › NOISE FILTER (for 2TR-FE)

NOISE FILTER (for 2TR-FE) > INSTALLATION

for Preparation Click here



1. INSTALL RADIO SETTING CONDENSER


E075971
  1. Connect the connector.

  1. Wind new vinyl tape around the hose and install the radio setting condenser.



2. INSTALL AIR CLEANER ASSEMBLY


G037934E01
  1. Install the air cleaner cap together with the air cleaner hose No. 1.

  1. Connect the 2 air cleaner clamps.

  1. Tighten the hose clamp bolt, then connect the air cleaner hose No. 1.

  1. Connect the wire harness clamp.

  1. Connect the mass air flow meter connector.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }