NOISE FILTER (for 2TR-FE) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE AIR CLEANER ASSEMBLY |
![]() |
Disconnect the mass air flow meter connector.
Disconnect the wire harness clamp.
Loosen the hose clamp bolt, then disconnect the air cleaner hose No. 1.
Disconnect the 2 air cleaner clamps.
Remove the air cleaner cap together with the air cleaner hose No. 1.
| 3. REMOVE RADIO SETTING CONDENSER |
![]() |
Disconnect the connector.
Remove the tape and the radio setting condenser.